TSB's

Spring Has Sprung

This bulletin applies to 2013 Dodge Dart vehicles built after April 22, 2012, and before June 23, 2012. A clunking or crunching noise may be evident at the right rear spring.

Raise the vehicle on a hoist and inspect the rear coil springs. If the right rear spring is not located properly (unseated), remove and replace the spring.

Apparently the incorrect spring may have been installed at the factory.

1) Front of vehicle. 2) Rear of vehicle. 3) Coil spring, 4) Jounce bumper. If the spring appears improperly seated as shown here, replace the coil spring.
<p>1) Front of vehicle. 2) Rear of vehicle. 3) Coil spring, 4) Jounce bumper. If the spring appears improperly seated as shown here, replace the coil spring.</p>

Post a comment
 

Comments (0)

 

Post a Comment

Submit
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe