The software for the GR8 Battery Diagnostic Station is updated periodically to fix software bugs and enhance the tool’s function. You can now use the Midtronics GR8 update wizard to download software and firmware to your GR8 using a PC and the Internet. It is extremely important to use the latest GR8 software to ensure that the current battery testing and diagnostic procedures are used.
Honda is also introducing a new policy to ensure that GR8 testers are update promptly. The GR8 software must now be updated within three days of receiving notification from an iN message or other Honda communication.
GR8 UPDATE REQUIREMENTS
GR8 Battery Diagnostic Station: P/N MTRGR81100P
USB-to-mini-USB cable (Midtronics P/N A128)
An IBM-compatible PC with Windows 95 operating system or higher (Windows 2000 or XP preferred).
GR8 software version 192-210007F or later
Software version changes:
* Last character of the version number changed to F
* Boot-up time was reduced
* Monthly test counters were corrected
* Battery type was added to the printouts
GR8 UPDATE INSTRUCTIONS
The update should take five to 10 minutes. Make sure that the update is not interrupted. If the update is interrupted, it could damage the GR8, requiring sending the unit to Midtronics for repair (this is not covered under warranty).
1. Make sure that the GR8 is off and the SD card is removed.
2. Online, go to www.midtronics.com.
3. Enter your username and password, then click on the Login button.
(Username: hondagr8 Password: hondagr8)
NextFix rattle & roll