Spot welds need help

Some owners of 2007-2011 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevy Avalanche, Silverado, Suburban and Tahoe, and GMC Sierra, Yukon, Yukon Denali, Yukon XL and Yukon Denali XL vehicles may complain about a pop, squeak or tick noise from the left front dash area when driving over bumps. The noise is worse when cold and may go away at higher ambient temperatures.

The concern may be caused by a loose spot weld that attaches the L bracket from the left front fender panel to the front bulkhead.

To resolve the problem, add three bolts (with nuts) between the left front fender brackets and the fender inner panel. This fender bracket is spot welded to the inner panel and attaches to the front-of-dash with two nuts (studs through the dash panel). These three bolts/nuts are added through existing holes in the bracket and fender.

Add three bolts and nuts to the three holes as shown.
<p>Add three bolts and nuts to the three holes as shown.</p>

Post a comment

Comments (0)


Post a Comment

Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine