Nissan advises that before replacing a configurable BCM, always select Save Configuration whether or not it has any manually configurable options.
After replacement, “Write Configuration” MUST then be performed and OK selected, even if there are not any options listed.
Auto settings are not visible in CONSULT III plus and it is not possible to confirm these settings.
If the original BCM is damaged and “Saving” configuration is not possible, replace the BCM, perform “Write Configuration,” and select OK to ensure “auto” settings are correct. Even if manual settings are correct or there are no manual settings.
After configuration is completed:
Register Fob (if applicable)
Complete TPMS registration
PreviousSqueaky Subaru paper-cut
NextJag rear brake ID