TSB's

Nissan note

Hose with pressure sensor (left). Always use a new O-ring whenever replacing the pressure sensor (right).
<p>Hose with pressure sensor (left). Always use a new O-ring whenever replacing the pressure sensor (right).</p>

This TSB applies to 2004-2012 Nissan Armada and 2004-2012 Titan models.

If the high pressure power steering hose needs to be replaced for any reason, the new hose comes without the pressure sensor.

When replacing the hose, reuse the existing pressure sensor. Replace the pressure sensor only if there is a pressure sensor related issue. Always use a new O-ring when installing a new existing pressure sensor. Always use both copper washers (mounted at the power steering pump).

When replacing the pressure sensor, tighten to 14.5 ft.-lbs.

PARTS INFORMATION

DESCRIPTION                       HOSE W/SENSOR         HOSE W/O SENSOR

Hose and tube assembly…...…….49720-7S000……………49720-7S00A

Copper crush washer………….… 49726-Y0100

O-ring………..……………......….….49345-6N200

Pressure sensor…..………………49763-6N20A

Post a comment
 

Comments (0)

 

Post a Comment

Submit
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe