TSB's

Check the Fuses

 

If no witness marks are seen on both terminals of each fuse (as shown on fuse at right), replace the fuse box.
<p>If no witness marks are seen on both terminals of each fuse (as shown on fuse at right), replace the fuse box.</p>

This bulletin applies to 2010-2013 Cadillac SRX and 2013 XTS vehicles. Some customers may comment on one or more of the following concerns (which may be intermittent):

  • Reduced engine power and/or engine power is reduced message displayed in the DIC.
  • No crank.
  • No start.
  • Service Stabilitrak message displayed in the DIC.
  • Electric parking brake light on.
  • Liftgate is inoperative.
  • Various communication DTCs set.

These concerns may be caused by poor terminal contact between the fuse and fuse block.

Remove the ECM_BATT and TCM_BATT fuses from the underhood fuse block and inspect each fuse terminal for contact witness marks (scratches).

If there are no contact witness marks on both terminals of either fuse, replace the underhood fuse block. If there are witness marks on both terminals of each fuse, refer to the service manual for further diagnostics.

Tags: Cadillac  Cadillac SRX  GM 
Post a comment
 

Comments (0)

 

Post a Comment

Submit
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe