TSB's

Shake, Rattle and Roll

Some 2010-2013 Ford Transit Connect vehicles may exhibit am excessive engine vibration at idle, most noted when the transmission is in reverse.

Inspect the transaxle roll resistor for debris (stones, ice, snow, etc.). Remove any debris. Remove the roll restrictor from the cross member and install an adhesive pad AS4Z-6C038-A to the roll restrictor.

Using a razor or Exacto knife, remove excess pad material within the rectangular area. Install the adhesive pad aligned properly as to not interfere with clamping force. No material should be trapped between the roll resistor and cross member.

Install the roll restrictor and tighten the attachment bolt to 52 ft.-lbs.

Remove excess pad material from the rectangular area prior to installing the adhesive pad.
<p>Remove excess pad material from the rectangular area prior to installing the adhesive pad.</p>

Post a comment
 

Comments (0)

 

Post a Comment

Submit
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe