Products

Liqui Moly Has New Additive Line for Pickup Trucks

Liqui Moly says its new additive line especially designed for pickup trucks will ensure the truck gets it full performance back.
<p>Liqui Moly says its new additive line especially designed for pickup trucks will ensure the truck gets it full performance back.</p>

Liqui Moly GmbH has introduced an additive line especially for pickup trucks. The new Truck Series is made up of five gasoline, diesel and oil additives.

The line includes: the Truck Series Complete Diesel System Cleaner, the Truck Series Diesel Performance and Protectant, the Truck Series Complete Fuel Cleaner for gasoline engines, and the DPF Protector for trucks used for short journeys and in urban traffic. The fifth additive of the new Truck Series is the Oil Treatment.

A description of each line and its application follows.

Liqui Moly says the Truck Series Complete Diesel System Cleaner is an effective cleaning additive, which frees the fuel system and the combustion chambers from deposits. It is ideally implemented from time to time, for example, as part of the oil change. Or if problems occur due to deposits, i.e. the motor runs unsteadily when idling, no longer exerts its full performance or expels smoke clouds. The Truck Series Complete Diesel System Cleaner can either be simply added to the tank or the fuel filter is filled with the additive instead of diesel after being replaced. The engine then runs for a short time on pure additive for the best cleaning. A clean motor combusts the fuel more efficiently and therefore provides a better performance.

The Truck Series Diesel Performance and Protectant is designed for permanent use. It is multi-talented, not only removing deposits, but also preventing the creation of new deposits and increasing the cetane number. A higher cetane number improves the combustion of the fuel and the motor provides better performance.

The counterpart for petrol motors is the Truck Series Complete Fuel Cleaner. With it the motor runs more quietly and consumption is reduced. The company says that the older the truck and the higher the mileage, the greater the effect of the additives. The large 500 ml (0.53 quart) cans are designed for the tank capacity of pick-up trucks.

The fourth additive of the new Truck Series is the DPF Protector. If the truck is mostly used for short journeys and in urban traffic, the diesel particulate filter does not reach the necessary temperature in order to begin automatic regeneration. The result: The filter is prematurely blocked. The DPF Protector reduces the temperature required for automatic regeneration, so that the filter remains unblocked.

The fifth additive of the new Truck Series is the Oil Treatment. It contains MoS2 particles as a lubricant, to reliably protect the motor against wear. This is not only important when starting the motor, when the oil has not yet reached every part of the motor and metal grates against metal. Even when the motor is under extreme stress, it ensures that the motor is not damaged. And it even protects the motor in the event of complete oil loss.

Founded in 1957, Liqui Moly develops and produces exclusively in Germany. The company sells its products in more than 120 countries. For more information, visit www.liqui-moly.us.

Post a comment
 

Comments (0)

 

Post a Comment

Submit
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe