TSB's

Lexus Trans Fluid Level

This bulletin applies to 2010-2011 Lexus GX460 equipped with the A760F transmission; and 2008-2011 LX570 equipped with the AB60F transmission.

When checking the transmission fluid level, be sure to install a retaining pin in the thermostat cap. This will open the cooling loop and allow for accurate transmission fluid level measurement. Failure to perform this step will result in incorrect transmission fluid level and may cause shifting issues. Push the shaft down with a screwdriver by 5.5 – 7.0 mm, until the screwdriver contacts the step inside the cap, and insert a pin fully through the side hole. Remember to remove the retaining pin after checking fluid level.

Using a flat blade screwdriver, push the shaft down by 5.5 – 7.0 mm and install a retaining pin.
<p>Using a flat blade screwdriver, push the shaft down by 5.5 &ndash; 7.0 mm and install a retaining pin.</p>

Post a comment
 

Comments (0)

 

Post a Comment

Submit
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe