This bulletin applies to 2011 Nissan Juke vehicles, 2007-2011 Rogues, 2007-2011 Altimas and 2007-2011 Sentras. If the output speed sensor has been removed or replaced for any reason, the correct number of shims must be installed between the sensor and the CVT body.

Note the following information:

MODEL...........................MODEL YEAR............NO. OF SHIMS*

Rogue..............................2007-2010.................. 1

Rogue..............................2011........................... 2

Juke................................. 2011.......................... 2

Altima............................. 2007-2011.................. 2

Sentra............................. 2007-2009.................. 1

Sentra............................. 2010-2011.................. 2

Sentra w/QR25 engine....all years.......................1

*Shims are available as P/N 08915-4316A.

Assemble the output speed sensor with the proper O-ring.

Note the location of the output speed sensor.

Note the location of the output speed sensor.

Note shim location between the output speed sensor and the CVT body.

Note shim location between the output speed sensor and the CVT body.

 

0 Comments