This bulletin applies to 2014 BMW 328i models. One or more of the following conditions may be present:

  • Engine will not start.
  • Engine stops running.
  • The A/C compressor will not turn on.
  • The reverse lights do not work.
  • The transmission will not shift into gear.
  • Various chassis and engine check control messages are present.

The cause may be due to a loose ground point Z6000*4B on the engine block, near the starter.

Check and tighten the ground point Z6000*4B to 8Nm.Clear all fault codes that might have been stored if the ground was found to be loose.

Note the location of the ground point near the starter.

Note the location of the ground point near the starter.

0 Comments