Kia notes a change in Back-Up Camera Assembly and NAVI Head Unit software on Sorento vehicles produced after Sept. 29, 2011. Vehicles produced after this date have a different design Back-up Camera that also requires another version of the NAVI software for compatibility. Prior to ordering a reman NAVI head unit, follow this TSB to verify the NAVI head unit software version.

VEHICLE PRODUCTION DATE: Built prior to Sept. 29, 2011

NAVI SOFTWARE VERSION: V_52*_*

OE NAVI UNIT P/N: 96560 1U000CAAS

REMAN NAVI UNIT P/N: R6560 1U000CAAS

CAMERA TYPE: CMOS

CAMERA P/N: 95760 2P000

___________________________________________

VEHICLE PRODUCTION DATE: Built after Sept. 29, 2011

NAVI SOFTWARE VERSION: V_77*_*

PE NAVI UNIT P/N: 06560 1U000CA

REMAN NAVI UNIT P/N: R6560 1U000CA

CAMERA TYPE: Smart A Type

CAMERA P/N: 95760 2P201

___________________________________________

HOW TO DETERMINE THE COMBINATION OF NAVI SOFTWARE VERSION / CAMERA

If the NAVI software version cannot be verified via the NAVI head unit due to NAVI head unit malfunction (example: Failure to power-up), then determine the NAVI software version / camera pair based on vehicle production date.

IF THE NAVI SOFTWARE VERSION CAN BE VERIFIED VIA THE NAVI HEAD UNIT:

  1. With the system powered-up, press “SETUP” button on the NAVI head unit assembly.
  2. Select “System Info” in the setup screen.
  3. Check the “S/W Version” in the system info screen. Note: V_”XX” version digits 1 and 2 will be used to determine the software version (example: V_52 or V_77). “*_*” version digits 3 and 5 will vary.
  4. Select correct combination of NAVI head unit and camera using the production date information provided earlier.

 

Press the SETUP button on the NAVI head unit.

Press the SETUP button on the NAVI head unit.

Select “System Info” in the setup screen.

Select “System Info” in the setup screen.

Check the “S/W Version” in the system info screen.

Check the “S/W Version” in the system info screen.


 

0 Comments