Clore Automotive Inc. has added Model PL6800, a 12-volt 100A flashing power supply and 100/40/10A battery charger to its Solar product line.
The PL6800 is designed to provide stable power, on demand up to 100 amps, to a vehicle electrical system to support module reprogramming. It also provides full-service battery charging capability from 10 to 100amps, to service everything from small vehicle batteries to the multi-battery packs found in over-the-road vehicles.
In power supply mode, the Pro-Logix PL6800 provides power to maintain vehicle electrical system voltage at a preset level, increasing its output in response to system load increases to maintain a stable power environment for successfully reprogramming. The voltage output range of 13.1-14.9V is adjustable in 0.1V increments. allowing the operator to dial the output in exactly as specified by the supplier of the vehicle under service.
The Pro-Logix PL6800 also offers fast load responsiveness for ultra-quick recovery from system demand increases. Clore says it delivers its massive power with minimal voltage ripple, providing a clean flow of power to the vehicle without risk of programming interference.
In charging mode, the PL6800 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery or battery pack serviced.
The PL6800 features the ability to properly charge a wide variety of lead acid battery types, including conventional, AGM, spiral wound, start-stop, deep cycle and marine batteries–for virtually any lead acid battery type installed in a vehicle, the PL6800 can deliver a proper, beneficial charge.
Clore says that with a maximum charge rate of 100A, the PL6800 can bring even severely depleted 4-battery and 8-battery packs back to full charge quickly and effectively.
ThePL6800 adapts its charging approach based on the needs of each battery or battery pack it services. Such adaptations can include activating a soft start mode on deeply discharged batteries, a battery repair mode on distressed batteries and temperature compensation. It also incorporates numerous features to make charging safer for the operator and the vehicle/battery being charged.
For more information, visit www.cloreautomotive.com.