Products

Bosch Releases OTC Heavy-Duty Gear Puller

Bosch says the 8-3/8-inch crossbar on the new OTC heavy-duty gear puller is rated at 8 tons and works on almost any heavy-duty application.
<p>Bosch says the 8-3/8-inch crossbar on the new OTC heavy-duty gear puller is rated at 8 tons and works on almost any heavy-duty application.</p>

Bosch Automotive Service Solutions has introduced an OTC heavy-duty gear puller designed for larger gear and heavy-duty applications.

The company says the new OTC 6614 heavy duty gear puller is stout enough for almost any heavy-duty application and includes a pair of metric bolts for most applications. The slim design cross block allows more room to set up in tight quarters to pull more gears.

The puller has a spread range of removing gears from 2 inches to 7-1/4 inches in diameter, including most cam gears.

The tempered steel, rust inhibitor-coated bolts are graded 10.9, have M12x1.75 inch threads and are 90mm in length.

The puller has a 5-3/4-inch long forcing screw threaded 5/8 inches-18 and has pulling reach of 3-1/4 inches. The tool includes sliding plates to ensure smaller gear bolts up to ½ inch in diameter are always centered.

The puller is treated to resist corrosion and is covered by OTC’s lifetime warranty.

The 6614 heavy duty gear puller is available now. For more information on the OTC 6614 heavy duty gear puller and other OTC specialty tools, visit www.OTCTools.com.

View Company Website

Post a comment
 

Comments (0)

 

Post a Comment

Submit
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe