TSB's

Blind Spot Bug

This bulletin applies to 2013 Chrysler Grand Voyager/Town and Country vehicles built between April 22, 2012, and Dec. 22, 2012, equipped with Blind Spot and Cross Path Detection.

The customer may experience the blind spot indicator in either outside mirror flashing or on continuously. The technician may find no DTCs.

Using a scan tool, verify that no Blind Spot Monitor DTCs are present. Reprogramming is necessary. Install a battery charger to prevent battery voltage from dropping below 13.2 volts or rising above 13.5 volts during the flash.

Using wiTECH, check the part number of the LBSS and RBSS. If the part number ends with “AB,” flash reprogram the LBSS and RBSS using software level release 13.03 or higher.

Post a comment
 

Comments (0)

 

Post a Comment

Submit
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe