TSB's

Mitsu Key Argument

This bulletin applies to 2013-2015 Mitsubishi Outlander Sport vehicles. If the vehicle incorrectly indicates that the key is in the ignition, replace the engine starting switch attaching switch (P/N 4408A155). The key indicator switch detecting the key in the ignition may be operating intermittently.

In order to replace the engine starting switch attaching switch, remove the steering wheel, separate the upper and lower column covers, and remove the steering column switches.

There is no need to remove the ignition switch assembly.

Remove three screws that attach the engine starting switch. Refer to the screw locations marked with circles in the following photo (one screw for the antenna and two screws for the switch).

Note the location of the three screws (left). The key indicator switch is identified by the arrow (right).
<p>Note the location of the three screws (left). The key indicator switch is identified by the arrow (right).</p>

Post a comment
 

Comments (0)

 

Post a Comment

Submit
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe