TSB's

Bad Fan on Wrangler

This bulletin applies to 2013-2014 Jeep Wrangler vehicles built between May 2, 2013, and Aug. 22, 2013. The engine cooling fan operation may not be properly configured.

The fix may require reprogramming software using release 14.01 or higher. The customer may experience the temperature gauge reading high and the fan not activating as needed.

Using a scan tool, first check for DTCs. If any are set, record and repair as needed before the reflash.

Using wiTECH, the reconfigure procedure is available under the diagnostic procedures tab found on the home page Vehicle View of wiTECH.

The vehicle may not be properly configured for the fan type installed on the vehicle.
<p>The vehicle may not be properly configured for the fan type installed on the vehicle.</p>

Post a comment
 

Comments (0)

 

Post a Comment

Submit
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe