Technical Service Bulletins

ECM Anomaly Causes Cadillac Flash

Order Reprints
Cadillac ECM TSB.jpg

With these 2016-2017 Cadillac vehicles, do not replace the ECM. Reprogram the ECM with the latest available software. Refer to K20 Engine Control Module Programming Setup in the service manual.

Owners of 2016-2017 Cadillac ATS or CTS vehicles equipped with a 2.0L engine may comment about a check engine light on, a no-start condition, stall and/or reduced propulsion. During diagnosis, DTC P0606 (control module processor performance) set in the ECM. The cause maybe a software anomaly in the ECM.

If you encounter this condition, do not replace the ECM. Reprogram the ECM with the latest available software. Refer to K20 Engine Control Module Programming Setup in the service manual.

Related Articles

Axle Issue Causes NVH for Cadillac

Might Not Be the ECM

ECM Glitch

You must login or register in order to post a comment.