Technical Service Bulletins

Mazda Is Due for a Fuel Pump Upgrade

Order Reprints
MAZDA fuel pump TSB.png

A: fuel pump; B: fuel pipe; C: rubber seal.

This bulletin applies to 2012-2013 Mazda3 with Skyactiv 2.0L, 2013-2014 CX-5 built before Dec. 1, 2013, 2014 Mazda3 built before Dec. 1, 2013 and 2014 Mazda 6 built before Dec. 1, 2013.

Some vehicles may experience the check engine light on with DTC P0191:00 (fuel pressure sensor circuit range/performance problem...except 2014 Mazda3) or P0088:00 (fuel pressure sensor circuit range/performance problem ....2014 mazda3) stored in memory.

This is caused by the high pressure fuel pump not generating the target fuel pressure due to a manufacturing error of the inner parts.

  1. Verify the concern.
  2. Replace the high pressure fuel pump with a modified one according to the workshop manual.
  3. Replace the pump, fuel pipe and rubber seal. Part numbers are as follows.


P/N ITEM

PE18-20-3F0.......... fuel pump (all models)

PE01-13-290D........ fuel pipe (2.0L)

PY01-13-290A.........fuel pipe (2.5L)

PE01-13-555........... rubber seal (all models)

Related Articles

Toyota Issues a Recall Due to Fuel Pump

Honda Recalls Insight Vehicles Due to Fuel Pump Problem

That Mazda Water Pump Might Be Just Fine

You must login or register in order to post a comment.