Technical Service Bulletins

Check AGS Connection on Dodge

Order Reprints
KEYWORDS Dodge Mitchell 1
DODGE Dart AGS TSB.jpg

If the MIL is on, with DTC U11E9 stored after fascia removal, confirm the AGS electrical harness connector is properly connected.

| Photo Credit: Chrysler

This bulletin applies to 2013-2015 Dodge Dart and 1500 pickup vehicles equipped with an active grille shutter (AGS).

The MIL may be on, with DTC U11E9 stored after fascia removal. The AGS electrical harness connector may not be properly connected. Code U11E9 indicates lost communication with AGS if the vehicle is started with the AGS electrical harness disconnected.  Confirm that the harness is connected properly and clear any DTCs.

Related Articles

Check the Subaru's Connection

A Check Following Service on Ram

Ram 1500 AGS issues

You must login or register in order to post a comment.