News Technical Service Bulletins

How to Fix Chrysler Grand Voyager/Town and Country Flashing

Order Reprints
CHRYSLER (1).jpg

Using wiTECH, check the part number of the LBSS and RBSS. If the part number ends with “AB,” flash reprogram the LBSS and RBSS. Using software level release 13.03 or higher.

| Photo Credit: Moto Logic

This bulletin applies to 2013 Chrysler Grand Voyager/Town and Country vehicles built between April 22, 2012 and Dec. 22, 2012, equipped with Blind Spot and Cross path Detection.

The customer may experience the blind spot indicator in either outside mirror flashing or on continuously. The technician may find no DTCs. Using a scan tool, verify that no Blind Spot Monitor DTCs are present. Reprogramming is necessary. Install a battery charger to prevent battery voltage from dropping below 13.2 volts or rising above 13.5 volts during the flash.

Using wiTECH, check the part number of the LBSS and RBSS. If the part number ends with “AB,” flash reprogram the LBSS and RBSS. Using software level release 13.03 or higher.

Related Articles

Town & Country No-Start

Fixing the Chrysler Minivan Blind Spot Monitor

How to Fix Chevy Coolant Leak

You must login or register in order to post a comment.