News Technical Service Bulletins

Insufficient Power Door Mirror Tilt in Dodge

Order Reprints
DODGE (2).jpg

Install a battery charger to insure that battery voltage does not drop below 13.2 volts or above 13.5 volts during the flash. Reprogram the door module (DMFL/DMFR) with software release 14.01 or higher.

| Photo Credit: Dodge

Certain 2014 Dodge Durango vehicles may exhibit insufficient power door mirror tilt when the transmission is placed in reverse.

Apparently, the fix merely requires a software update. Using a scan tool (wiTECH) with diagnostic procedures available in TechCONNECT, verify that no DTCs are present. Record and repair as necessary before reprogramming.

Install a battery charger to insure that battery voltage does not drop below 13.2 volts or above 13.5 volts during the flash. Reprogram the door module (DMFL/DMFR) with software release 14.01 or higher.

After reprogramming, perform the window relearn procedure. Clear any DTCs that may have set in other modules.

Related Articles

Dodge Ram May Have Overheated Mirror

Kia Sedona Power Sliding Door Needs a Fix

Insufficient Oil Pressure Supply Causes BMW Issue

You must login or register in order to post a comment.