News Technical Service Bulletins

Update Chrysler to Get Rid of Stubborn DTC

Order Reprints
CHRYSLER (5).jpg

Perform a reflash in the normal manner to prevent battery voltage from dropping below 13.2 volts or climbing above 13.5 volts, and reprogram the PCM with the latest software. 

| Photo Credit: Chrysler

This bulletin applies to 2012 Chrysler Grand Voyager and Town and Country vehicles equipped with a 3.6L engine and built before June 25, 2012. With the MIL on, the technician may find DTC P0108 (manifold absolute pressure sensor circuit high) has been set active or stored. Apparently, updating the software will correct the concern. 

Using a scan tool (wiTECH) with diagnostic procedures available in TechCONNECT, first verify that all engine systems are functioning properly. If DTCs other than P0108 are present, record and address as needed before updating. 

Perform a reflash in the normal manner to prevent battery voltage from dropping below 13.2 volts or climbing above 13.5 volts, and reprogram the PCM with the latest software. Type the necessary information on an authorized modifications label and attach it near the VECI label. 

Related Articles

The Answer to Chrysler's No-Start Condition

Update Toyota to Latest Software

How to Fix Chrysler Grand Voyager/Town and Country Flashing

You must login or register in order to post a comment.