Industry

Clore Adds Flashing Power Supply and Battery Charger to Solar Line

Order Reprints
Clore Adds Flashing Power Supply and Battery Charger to Solar Line

Clore Automotive Inc. has added the Pro-Logix PL6100, a 12-volt 100A flashing power supply and 60/40/10A battery charger, to its Solar Article line.

Clore says the PL6100 is designed to provide stable power, on demand up to 100 amps, to a vehicle electrical system to support module reprogramming. It also provides full service battery charging capability from 10 to 60 amps, to service everything from small vehicle batteries to Group 31 batteries.

In power supply mode, the Pro-Logix PL6100 provides power to maintain vehicle electrical system voltage at a preset level, increasing its output in response to system load increases to maintain a stable power environment for successfully reprogramming.

Features include a voltage output range of 13.1-14.9V, adjustable in 0.1V increments. allowing the operator to dial the output in exactly as specified by the supplier of the vehicle under service. Fast load responsiveness provides ultra-quick recovery from system demand increases. Clore says it delivers its massive power with minimal voltage ripple, providing a clean flow of power to the vehicle without risk of programming interference.

In charging mode, the PL6100 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery or battery pack serviced.

The PL6100 is designed to properly charges a wide variety of lead acid battery types, including conventional, AGM, spiral wound, start-stop, deep cycle and marine batteries.

In charging mode, the PL6100 adapts its approach based on the needs of each battery or battery pack it services. Such adaptations can include activating a soft start mode on deeply discharged batteries, a battery repair mode on older/distressed batteries and temperature compensation when charging in extreme temperatures. It also incorporates numerous features to make charging safer for the operator and the vehicle/battery being charged, including over-voltage protection, reverse polarity protection, smart clamp technology and battery fault detection.

Clore Automotive designs, develops and manufactures automotive service equipment for professionals and consumers, including jump starters, battery chargers, battery testers, power inverters and LED lighting solutions.

For more information, visit www.cloreautomotive.com.

Related Articles

Aftermarket Sales to Drop 8.8% This Year, Rebound in 2021

Car Care Council Offers Materials to Promote Fall Car Care Month

EnerSys Given Approved Vendor Status for the Automotive Parts Services Group

You must login or register in order to post a comment.