TSBs

Lazy Thermometer Reflash

Order Reprints
Lazy Thermometer Reflash

This bulletin applies to 2012-2013 Dodge Charger vehicles built between Jan. 12, 2012, and April 27, 2013, and equipped with Outside Temperature Display and/or Vehicle Information Center. The customer may experience a delay to update the ambient air temperature display with the actual ambient air temperature.

The condition is more noticeable during short/slow commutes and with a large ambient air temperature increase between drive cycles.

Using a scan tool, verify that no DTCs are set. Record and repair as needed before proceeding.

1. Reprogram the BCM. Install a battery charger to keep battery voltage between 13.2 and 13.5 volts.

2. Flash reprogram the module.

3. Clear any DTCs that may have set and verify temperature display accuracy.

You must login or register in order to post a comment.