Technical Service Bulletins

Water Pump Relay Click

Order Reprints
Water Pump Relay Click

This bulletin applies to 2015 Alfa Romeo 4C Spider models. A clicking noise may be present from the auxiliary water pump relay. 

The concern may be caused by a rapid activation and deactivation of the relay. The fix involves reprogramming the PCM with the latest software. The software update will improve the activation and deactivation cycle of the auxiliary water pump relay.

Using a scan tool (wiTECH), verify that all engine systems are functioning as designed before proceeding. Record and repair as needed.  Install a battery charger to prevent the battery from dropping below 13.2 volts or rising above 13.5 volts during the flash process.

Reprogram the PCM with the latest software, and clear all DTCs that may have set as a result of the reprogramming.

Related Articles

Clear the Click in the Water Pump Relay

Audi Water Pump Seal

Water Pump Woes

You must login or register in order to post a comment.