Hyundai Seat Belt Bolt

Order Reprints
Hyundai Seat Belt Bolt

This bulletin applies to 2017-2018 Hyundai Santa Fe Sport vehicles. The driver’s seat belt anchor is attached to the vehicle’s inner sill structure with a bolt. The bolt may not have been properly torqued during vehicle assembly. 

Move the driver seat forward to allow access to the driver’s seat belt anchor bolt, located by the lower B pillar trim. Pull the anchor bolt cover up to expose the bolt. Set your torque wrench to 34.7 ft.-lbs.  (47 Nm). Apply torque until tightened to spec.

Reinstall the cover.

Related Articles

Chrysler Recalls Certain Ram 1500 Trucks Due to Overheating

Mazda Has Issues After Body Repair

Honda Recalls Odyssey Vehicles Due to Possible Pinch

You must login or register in order to post a comment.