Power steering hose change

This TSB applies to 2004-2012 Nissan Armada and 2004-2012 Titan vehicles. If the high pressure power steering hose needs to be replaced for any reason:
- The new hose now comes without the pressure sensor.
- When replacing the hose, reuse the existing pressure sensor. Replace the pressure sensor only if there is a pressure sensor related issue.
- Do not replace other related hoses unless necessary.
- Do not damage the pressure sensor during removal or installation.
- Always use a new O-ring when installing a new or existing pressure sensor.
- Pressure sensor mounting torque is 14.5 ft-lb (19.6 Nm).
- Always replace both copper crush washers (mounted at the power steering pump).
PS Hose/Tube assembly…………49720-7S00A (w/o sensor)
Copper washer (pair)……………49726-Y0100
O-ring seal………………………49345-6N200
PS pressure sensor………………49763-6N20A