Technical Service Bulletins

Toyota oil filter cap

Order Reprints
Toyota oil filter cap

Certain Toyota engines are equipped with a plastic oil filter cap assembly which can be damaged if the proper procedure is not followed. This applies to 2007-2010 Tundra and 2008-2010 Sequoia vehicles equipped with the 1UR-FE or 3UR-FE engine, 2009-2010 Corolla and Matrix with the 2ZR-FE, 2009 Highlander and Venza with the 1AR-FE and 20010 Camry and RAV4 with the 2AR-FE engine.

Toyota recommends using oil filter wrench P/N 09228-06500-02 or 09228-06501.

Confirm that the SST is fully seated on the oil filter cap when removing/installing. When installing, torque the cap to 18 +/- 3.7 ft.-lbf. The oil filter cap may be difficult to remove if the specified torque is exceeded.

Related Articles

Toyota Fuel Cap Fix

Toyota Fuel Cap Woes

Fixing Toyota Fuel Cap

You must login or register in order to post a comment.