TSBs

False DTC

Order Reprints
False DTC

This bulletin applies to the 2011 Subaru Forester equipped with a 2.5L naturally aspirated engine. DTC P0108 may be stored (manifold absolute pressure/barometric pressure circuit high input). There is a possibility that this DTC can be erroneously stored in memory when the starter motor is stopped before the engine starts completely.

This can occur if the ignition key is released before the engine fully starts or if the clutch pedal is released before the engine fully starts. If you determine that the code was set in error, new ECM reprogramming files are now available to prevent a recurrence of the condition.

The new logic was introduced in production in Aug. 3, 2011, starting with VIN B*782579.

PACK FILE NAME / P/N AFTER REPROGRAMMING / OLD P/N / MODEL

22765AB404.pak / 2765AB404 / 22765AB403 / 2.5 N/A AT CAL

22765AB414.pak / 22765AB414 / 22765AB413 / 2.5 N/A MT CAL

22765AB424.pak / 22765AB424 / 22765AB423 / 2.5 N/A AT FED

22765AB434.pak / 22765AB434 / 22765AB433 / 2.5 N/A MT FED

Related Articles

Chevrolet Says Suburban May Have Oil Pressure Problem

Jaguar Notes Problem With Pathfinder

Audi Engine Idle Speed May be Too High

You must login or register in order to post a comment.