Technical Service Bulletins

Don’t Let the Code Fool You

Order Reprints
Don’t Let the Code Fool You

This bulletin applies to 2007-2012 GMC Acadia vehicles. A “Service Stability” message may appear on the driver’s information center as a result of DTC C0561 set in the electronic brake control module (EBCM). The EBCM receives messages from the other modules over GMLAN which are needed to perform ABS, VSES and/or TCS functions.

According to GM, don’t replace the EBCM to resolve this concern. The PCM or BCM will typically set a DTC when the EBCM sets this DTC. Address DTCs in all modules before trying to address DTC C0561.

There have been some cases in the field where the diagnostic code was a type “B” code that would not set a check engine lamp but would set a DTC C0561 in the EBCM. Inspect the freeze frame and failure records in the PCM for anything that may cause a powertrain related code.

Related Articles

Don’t Let the Caddy Fool You

Don’t Let Oil Fool You in Mercedes-Benz

Audi Filler Cap on Coolant Can Fool You

You must login or register in order to post a comment.