Technical Service Bulletins

Focus on vibration

Order Reprints
Focus on vibration

Some 2000-2011 Ford Focus vehicles may exhibit an excessive engine vibration at idle, most noticeable when the transmission is engaged in reverse. This condition may be caused by small stones, road debris, ice or snow packed/lodged in the rear engine roll restrictor.

Inspect the rear engine roll restrictor for debris and remove any debris.

Remove the cross member-to-roll restrictor attachment bolt.

Install a service shield, P/N 2M5Z-16102-AB.

Install the roll restrictor attachment bolt and torque the bolt to 35 ft.-lbs. (on 2000-2007 models); or 52 ft.-lbs. (on 2008-2011 models).

Related Articles

Focus on the Small Stuff

Focus on the leak

Focus on the noise

You must login or register in order to post a comment.