Technical Service Bulletins

Hood -- not good -- vibrations

Order Reprints
Hood -- not good -- vibrations

If the trailing edge of the hood on a 2009-2010 Acura TSX vibrates or flutters on rough roads or at highway speed, the probable cause is insufficient support at the rear hood seal on the cowl cover.

Replace the rear hood seal with Acura seal P/N 74143-TL0-305.

Peel the original seal off. Install the new seal and firmly press the seal into place on its engagement rib.

 

 

Related Articles

Grinding/Cracking Noise Not Good for BMW

Bad Vibrations and Misfires

Bad Vibrations

You must login or register in order to post a comment.