Technical Service Bulletins

Avoid Air in Power Steering

Order Reprints
Avoid Air in Power Steering

This bulletin applies to 2008-2013 Buick Enclave, 2009-2013 Chevy Traverse, 2007-2013 GMC Acadia and 2007-2010 Saturn Outlook vehicles that require replacement of a power steering cooler. This bulletin outlines the procedure to prevent introducing a large amount of air into the system during service.

Perform the following steps:

1. Block off the hoses near the cooler connection with appropriate clamps.

2. Disconnect the cooler from the lines and remove the cooler.

3. Pre-fill the new cooler on the bench and cap off the pre-filled cooler ends.

4. Install the new pre-filled cooler and remove the block-off clamps.

5. Follow the power steering system bleed procedure in the service manual.

Related Articles

BMW Power Steering Failures

Cold Zaps GM Power Steering

Chevy Volt power steering notes

You must login or register in order to post a comment.