News Technical Service Bulletins

Loose Connector Causes Multiple Issues for Subaru

Order Reprints

A small number of field reports have been received by Subaru with a concern involving the DMS system (driver monitoring system) being inoperative. One of these reports stated a DTC U0156 for lost communication was stored in multiple modules. In addition, the seat memory feature was also found to be inoperative. After performing extensive electrical diagnostics, the root cause was traced to a loose harness connector located behind the lower exterior trim cover of the driver’s door mirror assembly. After re-seating the connector and making sure it was fully locked in place, all systems returned to normal operation.


Related Articles

Check for a Loose Connector on the Subaru

Subaru Recalls 877K Vehicles for Multiple Issues

Bad Connector, Multiple DTCs

You must login or register in order to post a comment.