News Technical Service Bulletins

Mitsubishi Stoplight Switch

Order Reprints
MITSU.jpg

This bulletin applies to 2013 Mitsubishi Outlander Sport vehicles, regarding an adjustment of the stoplight switch. The switch is inserted into the retainer and rotated approximately ¼-turn clockwise to lock it into position. Following is the adjustment procedure:

Hold the brake pedal in the UP position.

Insert the D-shaped switch into the retaining clip with the flat side of the switch at approximately the 8-o’clock position until it bottoms out against the brake pedal. Do not apply excessive pressure.

Rotate the switch clockwise about ¼-turn to lock it in place.

Confirm that the stoplights do not illuminate with the brake pedal in the released position.

Use a feeler gauge to confirm that the gap between the switch body and the brake pedal is 0.020” – 0.060” (0.5 – 1.5mm).


Related Articles

Sticky Switch for Mitsubishi Outlander

Lexus switch assembly switch

Noisy Heat Shields for Mitsubishi

You must login or register in order to post a comment.