This bulletin applies to 2012 Dodge Durango vehicles built after April 9, 2012, and before June 3, 2012. A thumping noise may be heard from the front wheels while braking.
1. Raise the vehicle and inspect the right and left brake rotors.
2. Do the rotors feature a one-line groove on the outer edge? If so, proceed to Step 2.Do you have an approved PSE on-car brake lathe? If yes, proceed to Step 3. If no, proceed to Step 4.
3. Using a PSE approved on-vehicle brake lathe, lightly resurface both front rotors.
4. Remove and replace the front brake rotors.
