Kia notes a change in Back-Up Camera Assembly and NAVI Head Unit software on Sorento vehicles produced after Sept. 29, 2011. Vehicles produced after this date have a different design Back-up Camera that also requires another version of the NAVI software for compatibility. Prior to ordering a reman NAVI head unit, follow this TSB to verify the NAVI head unit software version.
VEHICLE PRODUCTION DATE: Built prior to Sept. 29, 2011
NAVI SOFTWARE VERSION: V_52*_*
OE NAVI UNIT P/N: 96560 1U000CAAS
REMAN NAVI UNIT P/N: R6560 1U000CAAS
CAMERA TYPE: CMOS
CAMERA P/N: 95760 2P000
___________________________________________
VEHICLE PRODUCTION DATE: Built after Sept. 29, 2011
NAVI SOFTWARE VERSION: V_77*_*
PE NAVI UNIT P/N: 06560 1U000CA
REMAN NAVI UNIT P/N: R6560 1U000CA
CAMERA TYPE: Smart A Type
CAMERA P/N: 95760 2P201
___________________________________________
HOW TO DETERMINE THE COMBINATION OF NAVI SOFTWARE VERSION / CAMERA
If the NAVI software version cannot be verified via the NAVI head unit due to NAVI head unit malfunction (example: Failure to power-up), then determine the NAVI software version / camera pair based on vehicle production date.
IF THE NAVI SOFTWARE VERSION CAN BE VERIFIED VIA THE NAVI HEAD UNIT:
- With the system powered-up, press “SETUP” button on the NAVI head unit assembly.
- Select “System Info” in the setup screen.
- Check the “S/W Version” in the system info screen. Note: V_”XX” version digits 1 and 2 will be used to determine the software version (example: V_52 or V_77). “*_*” version digits 3 and 5 will vary.
- Select correct combination of NAVI head unit and camera using the production date information provided earlier.
