Do not replace other related hoses unless necessary (do not replace as a set). Do not damage the pressure sensor during removal or installation. Always use a new O-ring when installing a new or existing pressure sensor. Pressure sensor mounting torque is 14.5 ft.-lbs. Always replace both copper washers (mounted at the power steering pump).
Do not allow dirt or contamination to enter the hydraulic system. Always secure the pressure sensor mounting block in a soft jaw vise when removing or installing. Do not clamp onto the banjo end of the hose.
PARTS INFORMATION
DESCRIPTION HOSE W/SENSOR HOSE W/O SENSOR QTY
Hose & tube assembly……….49720-7S000 49720-7S00A 1
Copper washer……………….49726-Y0100 2
O-ring seal……………………49345-6N200 1
Pressure sensor……………….49763-6N20A 1
