1. Site Placement

Ram Needs Fuel Pressure Sensor and Line Replacement

Dec. 21, 2020
7Ram1

This bulletin applies to 2019 Ram ProMaster City vehicles equipped with a 2.4L Multiair engine. The MIL may be on and you may find DTC P018C (fuel pressure sensor circuit low). 

This applies to vehicles built on or after Aug. 3, 2018, and on or before Aug. 13, 2018. 

This may require replacement of the fuel pressure sensor and line. 

The combination fuel pressure sensor and line is available as a single unit (sensor or line not available separately). The assembly is available as P/N 68338428AA. 

Replacement time should be about a half hour.

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Editor

Mike received a BA degree from Youngstown State University in English Literature with a minor in Journalism in 1975.
Email