FCA (Fiat-Chrysler America) announced a recall for certain 2019 Dodge Challenger and Charger vehicles.
Chrysler announced a recall involving the cruise control systems on a variety of 2014-2019 vehicles, including Ram trucks, Durango, Journey, Chrysler 300, 200 and Pacifica, Dodge Charger and Challenger and Jeep Cherokee, Grand Cherokee and Wrangler models, built from June 2012 to May 2018.
This bulletin applies to 2015-2017 Dodge Challenger and Charger vehicles equipped with an Anti-Spin Differential Rear Axle. The customer may complain about an axle groan/moan/rubbing/thumping/shudder noise during tight parking lot maneuvers.
This bulletin applies to 2011-2016 Dodge Charger, Chrysler 300, and 2011-2014 Dodge Challenger models. The technician may experience a crank/no-start condition after the fuel pump module was replaced.
This bulletin applies to 2011 Dodge Challenger vehicles equipped with a 3.6L engine and built before Feb. 2, 2011. The customer may experience a condition known as “idle buffering” while the vehicle is idling.
This bulletin applies to 2011-2013 Dodge Challenger vehicles built on or before May 1, 2013, and equipped with speed control. The customer may experience no response or slow response to the cruise control switch activations. Issues will be experienced by customers who activate/press the switches in a very fast manner.
This bulletin applies to 2014 Dodge Challenger, Charger and Chrysler 300 vehicles equipped with a 5.7L engine and built on or before Sept.4, 2013. A MIL may be on, with DTC P1621 (O2 sensor reference voltage circuit low) or P1622 (O2 sensor reference voltage circuit high).
This bulletin applies to 2011-2012 Dodge Challenger, Charger and 300C models equipped with a 3.6L engine. The customer may experience a MIL on and the technician may find code P0108 (manifold absolute pressure sensor circuit high) has been set active or stored.
A “small number” of 2014 Chrysler 300, Charger and Challenger models equipped with a 3.6L engine and built on or before 9-27-2013 may experience a MIL on, with DTC P0606 (internal control processor) set.
Sign up for a FREE subscription to Auto Service Professional magazineSubscribe