Displaying 1 - 10 of 18

TOPIC : fuel pump

SPONSORED BY

Slow Mazda?

Owners of 2016-2018 Mazda CX-9 vehicles produced before Nov. 10, 2017, may experience a lack of power with no warning lights illuminated and no related DTCs stored. This concern most likely occurs when fuel temperature is high and during situations where high power is required.

SPONSORED BY

TI Automotive Has New Brushless In-Tank Fuel Pump Kit

The new brushless in-tank fuel pump kit, BKS1000, from TI Automotive can support up to 1000 horsepower applications.

SPONSORED BY

Rich Vette

Owners of a 2016-2019 Chevy Corvette equipped with a 6.2L LT1, LT4 or LT5 engine may experience the SES light on and a rich running condition. Technicians may find DTC P0172 and P0175 stored. The cause may involve the high pressure fuel pump on these gasoline direct injection engines.

SPONSORED BY

Hey, That’s Normal

GM notes that 2013-2017 vehicles equipped with GDI engines (gasoline direct injection) may exhibit stalling, hesitation and lack of performance in high ambient temperatures.

SPONSORED BY

GM Recall

General Motors announced a recall of certain 2018 GMC Terrain, Acadia and Canyon vehicles built during March 2018.

SPONSORED BY

Smoke the Vette

On some 2014-2017 Chevy Corvette models, cracks on the top surface of the left fuel tank fuel pump module flange may cause a fuel odor or a loss of fuel on the ground. A check engine light may illuminate if the fuel tank is less than half full.

SPONSORED BY

A Gasket Too Far

Certain 2017 model year Buick LaCrosse vehicles may have been built with an unnecessary gasket in the high pressure fuel pump assembly. The fuel pump may wear out early and this could lead to degradation of engine performance over time.

SPONSORED BY

Honda Accord Recall

Honda announced a recall for certain 2015-2017 Accord models built from March 2014 to September 2017, equipped with a 3.5L V6 engine.

SPONSORED BY

Fuel Pump Needs New Connector

This bulletin applies to 2011-2016 Dodge Charger, Chrysler 300, and 2011-2014 Dodge Challenger models. The technician may experience a crank/no-start condition after the fuel pump module was replaced.

SPONSORED BY

BMW Fuel Pump Control

This bulletin applies to 2016 BMW 228i XDrive vehicles equipped with a 2.0L engine. If the engine stalls right after starting (when stationary), and/or the engine cannot be started, one of the following faults will be stored in the DME:

Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe