TOPIC : Nissan Juke

SPONSORED BY

Juke Can’t Take a Joke

This bulletin applies to 2012 Nissan Juke vehicles. When diagnosing for DTC C1130 (engine signal), ECM related DTCs must be diagnosed, repaired and DTCs erased first.

SPONSORED BY

Check the Numbers

This bulletin applies to 2011-2012 Nissan Juke vehicles. If the vehicle has the MIL on with DTC P0101, P0171 and/or P0172 stored and there are no drivability issues, confirm that the air cleaner cover and air flow sensor are installed.

SPONSORED BY

Nissan Turbo Tip

This bulletin applies to 2011-2017 Nissan Juke vehicles equipped with a turbocharger. When a turbocharger is replaced for any reason, be sure to also replace the Tube-Turbocharger Oil Feed (oil supply/inlet tube).

SPONSORED BY

Don’t Forget the Shims

This bulletin applies to 2011 Nissan Juke vehicles, 2007-2011 Rogues, 2007-2011 Altimas and 2007-2011 Sentras. If the output speed sensor has been removed or replaced for any reason, the correct number of shims must be installed between the sensor and the CVT body.

SPONSORED BY

Confirm Nissan Numbers

This bulletin applies to 2011 Nissan Juke models including 2WD and AWD vehicles built before Nov. 12, 2010.

SPONSORED BY

Intake Learn Is a Joke

This bulletin applies to 2007-2012 Nissan Juke models, where the IAVL (Intake Air Volume Learn) will not complete, using CONSULT.

Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe