Owners of 2010-2014 Chevy Camaros may comment about a popping noise (intermittent or multiple) from the rear of the vehicle after a cold start (this may also occur during an EVAP purge event).
Some owners of select GM vehicles may comment on a low brake pedal during braking. See the application list at the end of this bulletin.
This bulletin applies to 2010-2014 Chevy Camaro models. The customer may comment about an intermittent pop or multiple popping noises from the rear of the vehicle (this may occur shortly after a cold start or EVAP purge event).
This bulletin applies to 2010-2012 Chevy Camaro models equipped with the 6L80 or 6L90 automatic transmission, where the MIL is on, with DTC P0796 is found as an active or history code set in the TCM. Symptoms include a slip or no 4th gear, slip or no 5th gear, and/or slip or no 6th gear.
This bulletin applies to 2011 Chevy Camaro models, as well as other 2012 and prior GM vehicles. When diagnosing power steering fluid leaks, the technician may find a heat damaged fluid reservoir. When a power steering reservoir or reservoir seal is damaged, it’s important to make sure that potential associated issues are addressed.
This bulletin applies to GM vehicles equipped with HFV6 engines (3.0L and 3.6L LF1, LFW, LLT and LFX). Affected vehicles include 2010-2014 Buick Enclave and LaCrosse, Cadillac ATS, CTS, SRX and XTS, Chevy Camaro, Caprice, Equinox, Impala and Traverse and GMC Acadia and Terrain.
Owners of 2010-2014 Chevy Camaro vehicles may comment about an intermittent pop or multiple popping noises from the rear of the vehicle shortly after a cold start or EVAP purge event.
This bulletin applies to 2012 Chevy Camaro models. The SES light may be on, accompanied by stored fuel trim and/or O2 sensor related DTCs including P0101, P0137, P0138, P0140, P0141, P0157, P0158, P0160, P0161, P0171, P0174, P0420, P0430, P1174, P1175, P2096, P2097, P2098, P2099, P2177, P2178, P2179, P2180, P2187, P2188, P2189, P2190, P2270, P2271, P2272 and P2273.
This bulletin applies to 2010-2014 Chevy Camaro vehicles. Customers may comment about an intermittent pop or multiple popping noises from the rear of the vehicle shortly after a cold start (this may also occur after an EVAP purge event).
This bulletin applies to 2010-2013 Chevy Camaro models. In rare cases, a customer may report an intermittent fluctuation of IP gauges, no crank, SES light on, or various IP warning indicators or messages. Technicians may find that there is no communication to various High Speed LAN modules. Communication to control modules may be random and could change during inspection.
Sign up for a FREE subscription to Auto Service Professional magazineSubscribe