This bulletin applies to 2013-2017 Subaru Crosstrek vehicles, starting with VIN HH238540. The engine knock sensor has been redesigned to help improve assembly line efficiency and increase durability.
This bulletin applies to 2009-2016 Audi A5 Quattro vehicles equipped with a 2.0L Evo2 engine. The engine may judder during acceleration or run erratically. No event entry may be stored in the ECM. The air mass meter may be suspected as faulty.
Honda announced a recall for certain 2015-2017 Accord models built from March 2014 to September 2017, equipped with a 3.5L V6 engine.
This bulletin applies to 2010 and later Jaguar XJ models. A humming noise may be heard from the engine during idle. This may be caused by dust and/or water ingress to the primary drive belt idler pulley.
This bulletin applies to 2013-2015 Mitsubishi Outlander Sport vehicles. If the vehicle incorrectly indicates that the key is in the ignition, replace the engine starting switch attaching switch (P/N 4408A155). The key indicator switch detecting the key in the ignition may be operating intermittently.
This bulletin applies to 2015 and later Nissan vehicles. The MIL may be on, with DTC P0603 stored (ECM backup/circuit).
This bulletin applies to 2016 BMW 228i XDrive vehicles equipped with a 2.0L engine. If the engine stalls right after starting (when stationary), and/or the engine cannot be started, one of the following faults will be stored in the DME:
This bulletin applies to 2015-2016 Jaguar F-Type vehicles. The MIL may be illuminated and DTC P068A-00 may be stored in the PCM. DTC index actions may be unable to resolve the concern. This may be due to a PCM software error causing a CPU response time error during the vehicle shutdown procedure.
Some 2016-2019 Toyota 4Runner 4WD vehicles may exhibit a cyclical groaning/grinding noise from the front differential in 2WD that is not present in 4WD operation.
This bulletin applies to 2013-2016 Honda Accord vehicles. When driving under steady cruise between 30 and 65 mph or during light acceleration, if the engine intermittently rattles or runs rough with the MIL blinking, the probable reason is sticking VCM (Variable Cylinder Management) rocker arms, since these conditions are likely to activate VCM operation.
Sign up for a FREE subscription to Auto Service Professional magazineSubscribe