PREV 1 2 3 4 5 6 7 NEXT
Displaying 11 - 20 of 98

TOPIC : Nissan

SPONSORED BY

Nissan P4456

This bulletin applies to all 2009 and later Nissan models. On-board diagnosis of DTC P0456 is sometimes performed when the engine is not running.

SPONSORED BY

Nissan Rear Pop

This bulletin applies to 2016-2017 Nissan Altima SR and Maxima vehicles. A pop or clunk from the rear of the vehicle may be heard, especially when driving over bumps.

SPONSORED BY

Clicking Cube

This bulletin applies to 2011-2014 Nissan Cube models. A clicking noise may be heard from the left or right front CV-type axles during takeoff/acceleration. The fix may simply involve applying Molykote M77 grease (P/N 44003-7S000) to the hub bearing surfaces.

SPONSORED BY

Juke Can’t Take a Joke

This bulletin applies to 2012 Nissan Juke vehicles. When diagnosing for DTC C1130 (engine signal), ECM related DTCs must be diagnosed, repaired and DTCs erased first.

SPONSORED BY

Check the Numbers

This bulletin applies to 2011-2012 Nissan Juke vehicles. If the vehicle has the MIL on with DTC P0101, P0171 and/or P0172 stored and there are no drivability issues, confirm that the air cleaner cover and air flow sensor are installed.

SPONSORED BY

Nissan BCM

This bulletin applies to 2013 Nissan Murano vehicles with configurable BCM (body control module). Before replacing a configurable BCM, always select Save Configuration whether or not it has any manually configurable options.

SPONSORED BY

Nissan Turbo Tip

This bulletin applies to 2011-2017 Nissan Juke vehicles equipped with a turbocharger. When a turbocharger is replaced for any reason, be sure to also replace the Tube-Turbocharger Oil Feed (oil supply/inlet tube).

SPONSORED BY

Nissan Exhaust Tick

This bulletin applies to 2005-2008 Nissan Frontier models equipped with the QR25DE engine, and built before July 12, 2006. The issue may involve a ticking noise that sounds like spark knock, when accelerating 1/8 to 1/2 throttle opening.

SPONSORED BY

Don’t Forget the Shims

This bulletin applies to 2011 Nissan Juke vehicles, 2007-2011 Rogues, 2007-2011 Altimas and 2007-2011 Sentras. If the output speed sensor has been removed or replaced for any reason, the correct number of shims must be installed between the sensor and the CVT body.

SPONSORED BY

Confirm Nissan Numbers

This bulletin applies to 2011 Nissan Juke models including 2WD and AWD vehicles built before Nov. 12, 2010.

PREV 1 2 3 4 5 6 7 NEXT
Subscribe Today

Subscribe to Auto Service Professional

Sign up for a FREE subscription to Auto Service Professional magazine

Subscribe