1. Technical Service Bulletins

Reprogramming Honda Pilot Software

Nov. 6, 2023
Mitchell 1
See Program ID. If the Program ID does not match the table, the vehicle has not been updated.
See Program ID. If the Program ID does not match the table, the vehicle has not been updated.
Mitchell 1
Select Mode menu. Select On-Board snapshot.
Select Mode menu. Select On-Board snapshot.
This bulletin applies to 2016-2017 Honda Pilot vehicles. During a downshift from the ninth or eighth gear to the seventh gear or lower, a miscalculation in the TCM software may cause the MIL to come on with DTC P0716 (input shaft speed sensor range/performance). 

Check if the on-board snapshot shows DTC P0716.

If it does, reprogram using i-HDS software version 1.005.016 or later. J2534 rewrite software information: PC application version 1.1.0.6 or later. Database update 30-May-2019. You cannot apply the updates with the MVCI as a stand-alone tool. To update the software you must use the MVCI or the DST-I interface in conjunction with the J2534 rewrite software on the i-HDS.

Mitchell 1
Select and view all available on-board snapshots for automatic transmission (EAT).
Select and view all available on-board snapshots for automatic transmission (EAT).
YEAR              TRIM                PROGRAM ID          PROGRAM P/N

2016................2WD............28103-5EY-A000........28103-5EY-A00

2016...............AWD.............28103-5EZ-A000........28103-5EZ-A00

2017...............2WD.............28103-5EY-A100........28103-5EY-A10

2017...............AWD.............28103-5EZ-A100.........28103-5EZ-A10 
Mitchell 1
If no on-board snapshots show P0716, this bulletin does not apply. Continue with normal diagnostics. If P0716 is shown, select On Demand to e-mail it to Tech Line, then update the TCM software using the i-HDS J25354 rewrite software with the MVCI or DST-i.
If no on-board snapshots show P0716, this bulletin does not apply. Continue with normal diagnostics. If P0716 is shown, select On Demand to e-mail it to Tech Line, then update the TCM software using the i-HDS J25354 rewrite software with the MVCI or DST-i.
About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.